超声波联合PAM对污泥脱水性能的影响

以污泥脱水性能与沉降性能为指标,研究了超声波调理联合PAM对污泥脱水性能的影响。实验结果表明,单独使用超声波调理的最佳调理时间为20 s,此时污泥比阻为0.68×109s2/g;采用PAM对污泥进行调理时,在浓度为0.1%,投加量为100 mg/L时污泥比阻最小,为0.32×109s2/g;采用超声波与PAM联合调理时,利用正交试验得到最适合的组合条件为:调理时间20s、PAM投加量100 mg/L、浓度0.15%。     

剩余污泥对柠檬黄-85的吸附行为

以城市污水厂中的剩余污泥为主要原料制备污泥吸附剂(SA),并用于柠檬黄-85(Tt-85)脱色的实验研究。静态实验主要考察了pH值、投加量、反应时间、反应温度和Tt-85初始浓度对吸附的影响。结果表明:在投加质量浓度为6 g/L,pH值=2.0,温度为25℃的条件下,反应90 min后,SS对水中初始质量浓度为65 mg/L和221 mg/L的Tt-85去除率分别达到了97%和75%。对动力学实验数据进行拟合,发现准二级动力学模型能较好地描述SA对Tt-85的吸附行为。动态吸附柱实验表明,污泥凝胶球对水中Tt-85的去除率为64%。Langmuir等温吸附模型符合SA对Tt-85的吸附过程,其最大吸附质量比为27.78 mg/g,由SEM,FTIR和XRD的分析可得,SA对柠檬黄-85的化学吸附主要发生在表面,其中SA表面羟基官能团起到关键性作用。     

浙江省污水污泥处理处置状况的调查

通过对丽水、宁波、衢州、诸暨等浙江省境内十几个地区的污水处理厂的调查发现:目前浙江省内的污水处理工艺中,A2/O、A/O、氧化沟三种工艺占了近50%的份额。而SBR因其方法特点正在受到越来越多的重视。在污泥处理工艺中,填埋占了最大的一部分,有近70%的污水处理厂将产生的污泥进行填埋处理。目前,污泥处理技术单一,需要继续探寻污泥的减量和资源化技术,为日益增多的污泥探寻出路。     

生活污水处理厂污泥处置技术研究

针对生活污水处理厂污泥处置技术,介绍了国内外污泥的处理现状,提出了传统的污泥处置技术,主要是海洋倾倒,污泥消化技术法,污泥堆肥技术法,污泥的土地利用和污泥的有效利用法,给出林地利用与绿化利用随着污泥量的增长,污泥的处置越来越来受到人们的关注。介绍了国内外污泥处理现状和传统污泥处理处置方法,分析了污泥稳定和资源化处置技术及应用进展,提出了污泥堆肥和堆肥后污泥的土地利用是符合中国国情的污泥处置与资源化利用途径。     

渭河流域关中段城镇污水处理厂污泥处理技术调查与分析研究

根据渭河流域关中段的污染状况及《(渭河流域水污染防治三年行动方案(2012-2014年)》对科技攻关的实际需求,采用资料搜集、实地调查、问卷发放、数理统计等方式对渭河流域关中段55座城镇污水处理厂的污泥处理情况进行了调查与分析。根据调查分析结果,提出了渭河流域关中段城镇污水处理厂污泥处理技术在应用过程中存在的一些问题,并结合该流域实际情况提出了相应建议,期望能够对该流域污泥处理技术的良性发展提供"第一手"的参考资料。     

城镇污水处理厂脱氮除磷好氧污泥颗粒化研究

采用序批式生物反应器(SBR)培养好氧颗粒污泥处理模拟废水,优化好氧颗粒污泥内部好氧-兼氧-厌氧微环境,在反应器的快速启动、稳定运行阶段分别考察不同优化条件下系统的脱氮除磷性能。提出了优化污泥沉降时间、调控曝气方式等好氧污泥快速颗粒化途径,并研究排泥方式对颗粒污泥反应器稳定性的影响,通过强化脱氮除磷功能菌富集,实现氮磷同步高效去除。     

Experimental study on agitated drying characteristics of sewage sludge under the effects of different additive age

Drying experiments of dewatered sewage sludge (DSS) were conducted on a agitated paddle dryer, and the effects of additive agents, i.e., CaO, pulverized coal (PC), heavy oil (HO), and dried sludge ("DS" through back mixing) on the agitated drying characteristics of DSS were investigated. The results indicated that CaO can significantly increase the drying rate of DSS. The drying rate at CaO/DSS (mass ratio) = 1/100 was 135% higher than that of CaO/DSS = 0. Pulverized coal has no obvious effect on drying rate, but the increase of PC/DSS can promote breaking up of sludge lump. Heavy oil was found to be slightly effective in improving the drying rate of DSS in the examined experimental range of HO/DSS = 0-1/20. It is also found thatHOcan reduce the torque of the dryer shaft, due to its lubrication effect. Back mixing of DS was found to be effective in alleviating the unfavorable effect of the lumpy phase by improving the mixing effect of the paddle dryer. There was a marked increase of drying rate with an increase of the DS/DSS in the experimental range of DS/DSS = 0-1/3.     

Aerobic granules cultivated and operated in continuous-flow bioreactor under particle-size selective pressure

A novel method based on the selective pressure of particle size （particle-size cultivation method, PSCM） was developed for the cultivation and operation of aerobic granular sludge in a continuous-flow reactor, and compared with the conventional method based on the selective pressure of settling velocity （settling-velocity cultivation method, SVCM）. Results indicated that aerobic granules could be cultivated in continuous operation mode by this developed method within 14 days. Although in the granulation process, under particle-size selective pressure, mixed liquor suspended solids （MLSS） in the reactor fluctuated greatly and filamentous bacteria dominated the sludge system during the initial operation days, no obvious difference in profile was found between the aerobic granules cultivated by PSCM and SVCM. Moreover, aerobic granules cultivated by PSCM presented larger diameter, lower water content and higher specific rates of nitrification, denitrifieation and phosphorus removal, but lower settling velocity. Under long term operation of more than 30 days, aerobic granules in the continuous-flow reactor could remain stable and obtain good chemical oxygen demand （COD）, NH4^＋-N, total nitrogen （TN） and total phosphorus （TP） removal. The results indicate that PSCM was dependent on the cultivation and maintenance of the stability of aerobic granules in continuous-flow bioreactors.     

柱状污泥基活性炭制备方法及其除污染效能研究

以城市污水厂剩余污泥为原料,用氯化锌活化法研究一种柱状污泥基活性炭(CSAC)的制备方法及其工艺条件优化,并选择粉末污泥基活性炭(PSAC)和一种商品煤质碳(MAC)作为对照,考察了CSAC对重金属离子Cu(Ⅱ)和Pb(Ⅱ)及有机污染物硝基苯的吸附去除效能.结果表明,CSAC的比表面积及微孔容积分别是306.9 m2·g-1和0.109 cm3·g-1,仅为MAC的36.7%和23.6%,但其对Cu(Ⅱ)和Pb(Ⅱ)的平衡吸附量却远远高于MAC,说明CSAC表面存在的高含量酸性官能团在吸附去除重金属过程中起到了重要的作用.由于制备原料相同及制备工艺相似,CSAC与PSAC的理化性质基本相同,两种炭的表面酸性官能团含量较高,对Cu(Ⅱ)和Pb(Ⅱ)均具有较好的吸附去除效果,优于MAC,只是CSAC的比表面积和微孔容积略低于PSAC;在对硝基苯的吸附实验中,CSAC及PSAC的吸附效率均远远低于MAC,说明在对有机物硝基苯的吸附中,活性炭的比表面积等物理性质起到了较大的作用.同时,所制备的CSAC的稳定度大于95%,易于分离回收,不会造成二次污染,适合废水中重金属离子的吸附去除.     

基于代谢产物调控的活性污泥沉淀性能控制原理研究

通过对不同沉降性能活性污泥的胞外聚合物(EPS)进行荧光特性分析,探讨了荧光强度峰值、荧光区域积分等参数与污泥沉降性能的关系.研究表明,典型波长下荧光强度峰值与污泥沉降性能之间有很好关联性,据此,建立了微生物典型代谢产物与沉淀性能的调控曲线即活性污泥的安全操作线与微生物代谢状态曲线,确立了活性污泥沉淀性能调控区域即高代谢产物区可获得良好的固液分离效果.研究成果从微生物代谢的角度揭示了絮体结构的调控方法,具有重要的理论意义.